|
ReliaSoft
uses minor version "service releases" to add features and resolve
any issues with the software. These updates are free to registered
users and this page allows you to download the most recent service
release for Weibull++ 7.
We recommend
that you check this Web site occasionally to make sure that you
are always running the most up-to-date version of the software that
is available.
 |
| Current
Version of Weibull++ |
 |
 |
|
Compile Release Version |
Build Date |
|
7.5.4 |
3/12/08 |
|
To determine the Compile Release Version (CRV)
of the application on your computer, select
About from the Help menu. |
|
![]() |
![]() |
|
|
Prior
Versions |
|
If you have not yet upgraded from
Weibull++ 6, click
here to obtain the last service release for that version.
Version 6 has been retired but is still
supported
by ReliaSoft. Older versions (Weibull++ 1.0 to 5.0) are
no longer supported.
Click here to review some of the new and enhanced features
in version 7 or
click
here to order the upgrade. |
|
Single-User License |
|
If you have a single-user license for
Weibull++ 7 and your
organization has not yet updated to version 7.5.X, please
download the following full product setup, re-install
the software and re-enter/re-activate your license. (Why
do you need to re-install?
See FAQ.)
If you have a single-user license for
Weibull++ 7, and have
already updated to version 7.5.X, please download and install
the following service release.
|
|
Network License |
|
If you have a network license for
Weibull++ 7 and your organization has not
yet updated to version 7.5.X, please download the following
full product setup, re-install and re-activate the
software on each client computer. (Why do you need to re-install?
See FAQ.)
If your organization has already updated to version 7.5.X,
please download and install the following service release
on each client computer. NOTE: In order for the client
application to work properly, the current version of the
Network User Management Console must have been installed
on the server by the network administrator. To download
the most recent version of the network console,
click here...
|
|
|
Downloading and Installing Service Releases
To download the installation program, right-click the link
and select Save Target As (or the equivalent command
for your browser) from the shortcut menu.
Remember to close all other applications before running
the installation.
For Windows NT, 2000 or XP, you must be logged in with a
user account that has administrative rights while performing
the installation.
Contact ReliaSoft's
Technical
Support Engineers with questions or concerns.
|
|
| |
|
Modifications
and Enhancements to Weibull++ 7 |
|
The
modifications/enhancements for each service release are described
next. This information is also available in the ReadMe file
that is installed with the software. The
most recent service release (build) contains all previous modifications.
Build 7.5.4
Modifications
- Resolved an issue where importing
from Excel did not work if the source file contained one
or more empty sheets.
- Resolved an issue where the headers
of the Warranty Folio were not transferred to Excel.
- Resolved an issue where the Project
Explorer did not show when undocking it while child forms
were maximized.
- Resolved an issue with the Warranty
Folio when SPC calculation caused an error for some data.
- Resolved an issue where pasting
took a very long time if all cells were selected before
pasting.
- Added the number of zero failures
to the total number of failures.
- Always displays the pnz value on
the data and plot panels when it's less than 1.
- Added the ability to display
intervals on the adjusted line and/or the unadjusted
line in the probability plot for the 3-parameter Weibull
distribution.
Build 7.5.3
Modifications
- Resolved an issue for the "Date-of-Failure"
format of the Warranty Folio when calculating a forecast
and the starting date for the forecast is beyond the end
date of the model.
- Resolved an issue for the "Usage"
format of the Warranty Folio where updating the forecast
calculations did not update the plot.
- Resolved an issue for the "Date-of-Failure"
format of the Warranty Folio when running under German settings.
- Resolved an issue with an incorrect
message being displayed for the Non-Parametric RDA Folio
when the confidence level entered is equal to 0.5.
- Resolved an issue when deleting
multiple data sheets from the Data Folio.
- Resolved an issue with the calculation
in the QCP when used within the diagram and the associated
Data Folios did not have any data.
- Resolved an issue when plotting
Free-Form data, where the points did not show up under certain
circumstances.
- Added a visual sign to the Plot
Sheet to show whether the plot is in or out of sync with
the calculation of the corresponding Data Folio.
- Updated examples files.
- Updated the on-line help file.
Build 7.5.2
Modifications
- Resolved an issue for the "Nevada"
format of the Warranty folio when the "Suspend After" option
was used.
- Resolved an issue with the first
period for the warranty forecast when used with the usage
format in the Warranty folio. The issue occurred when the
number of days between the first forecast period and the
calculations end date was greater than the forecast increment.
- Resolved an issue where the degradation
folio was recalculated but the linked data folio's parameters
were not.
- Resolved an issue where after transferring
data from a Degradation folio to a Standard folio, the Standard
folio is hidden behind the Degradation folio.
- Resolved an issue when using Non-Parametric
RDA and calculating Mean Cumulative Function with confidence
intervals included; application calculated all values correctly
but the confidence bounds shown was always 95%.
- Resolved an intermittent issue
where the application could not handle an error for a specific
calculation of left-censored data.
- Resolved an issue for the usage
format of the Warranty folio where the shortcut menu did
not appear on the "Returns" sheet of the folio.
- Resolved an issue where importing
data from a text file was causing the data to be text formatted
in the data folio.
- Resolved an issue where deleting
multiple sheets from a data folio at the same time caused
an unexpected error.
- Resolved an issue where values
with decimal points were rounded off in the Non-Parametric
RDA folio.
- Resolved an issue for the dates
of failure and usage formats in the Warranty folio when
two or more entries on the "Sales" sheet had the same date
of manufacture.
- Resolved an issue for the "Nevada"
format of the Warranty folio when the "Calculate Chi-Squared
Values" option was used and the number of return periods
was greater than 252.
- Updated the on-line help file.
Build 7.5.1
Modifications
- Added support for tighter integration with ReliaSoft's
ALTA software. If ALTA 7.5.1 or higher is installed
on your computer, the "Weibull++" and "ALTA" buttons
at the bottom of the Project Explorer will allow you
to instantaneously switch back and forth between the
two applications.
Build 7.1.4
Modifications
- Added a new format to the Warranty Folio called
"Usage".
- Resolved an issue for conditional bound calculations
when Beta and Eta for the Weibull distribution are extremely
large.
- Resolved an issue in the Event Log where unwanted
blocks were transferring to BlockSim.
- Resolved an issue with the Gamma parameter estimation
for the 3 Parameter Weibull distribution.
Build 7.1.3
Modifications
- Resolved an issue with plots showing blank for customers
having installed BlockSim or BlockSim FTI release 6.5.4.
This was caused due to Weibull/BlockSim compatibility
considerations.
- Resolved an issue when the folio columns were not
resized correctly after the folio was resized horizontally
to the point where all columns were not visible.
- Resolved an issue where the calculation results
option for Weibull-Bayesian was reset to 'MED' after
recalculating the data.
- Resolved an issue with inputting dates in some European
formats in Event Log.
Build 7.1.2
Modifications
- Resolved an issue with the
"Side-by-Side" probability plots when the data contained
times-to-failure that were equal to 0.
- Resolved an issue with the
calculation of more than 32767 data rows when Mixed
Weibull or Generalized Gamma was chosen as the distribution.
- Resolved an issue with the
application giving an unexpected error when the Diagram
was minimized.
- Resolved an issue with the
plot when reading a Weibull++ 6 file that included a
plot that was modified by RS Draw.
- Resolved an issue when editing
the start and end dates on the data panel of an Event
Log that caused a wrong date conversion for some European
settings.
- Resolved an issue with the
application giving an unexpected error when a date-to-failure
cell well left empty on "Dates of Failure" Warranty
calculations.
- Added scroll bar to the Warnings
Window.
Build 7.1.1
Modifications
- Added language support for
Chinese, French, German, Portuguese and Spanish.
- Resolved an issue when "Alter
Parameters and Recalculate" menu became disabled after
altering a parameter.
- Resolved an issue with the
probability plot for interval data when there was only
one complete interval in the data.
- Resolved an issue with importing
data from Excel file when the distribution was not set
to the default value.
Build
7.0.6
Modifications
- Resolved an issue when moving
or copying data sheets.
- Added a report summary page
for the Event Log.
- Added print preview support
for the results panel window.
- Resolved an issue with exporting
Diagrams or Event Logs to BlockSim.
Build
7.0.5
Modifications
- Resolved an issue with lines
being jagged when printing plots.
- Added the ability to copy a
general spreadsheet chart or image to the clipboard.
- Resolved an issue with multiplots
when the data sheet returns to edit mode. The reference
to that data sheet now shows as red in the multiplot
sheet panel, which indicated the data sheet is not calculated.
Build
7.0.4
Modifications
- Resolved an issue with importing
multiplots when opening Weibull++ 6 files.
- Resolved an issue when PARAMNAME
and PARAMETER functions in the spreadsheet did not return
the value for Eta when Weibull 1-Parameter distribution
was used.
- Updated the plot titles to
allow for concatenation of default titles and custom
titles.
- Resolved an issue when international
settings were being used under Windows.
Build
7.0.3
Modifications
- Resolved an issue
with calculating Weibull 1-Parameter distribution when
the data contains only suspensions.
- Increased the Maximum
Number of Points in the 3-D Plot to 300.
- Added ability to change
languages in User Setup.
Build
7.0.2
Modifications
- Resolved intermittent
issue with converting Weibull++ 6 files.
- Added ability to add
MultiPlots in Standard Folios.
Build
7.0.1
Modifications
|
|
|
Version 7
